When configuring a Star TSP 100 printer for the business, there is one crucial parameter – host IP address. Why? Because the information is crucial when setting up the network as well as to see that all your devices are connecting well with the printer. So in this article, you will learn the most convenient way on How to Identify Startsp Host Ip Star Tsp100.
Staying Grounded with Basics of STAR TSP100
What is a Thermal Printer?
The STAR TSP100 is a thermal printer that’s why the printing is done by the heat on the special paper instead of ink or toner. Thermal printers are used in many settings due to the fast print times and less costly than many other printer types.
Features of the STAR TSP100 (LAN)
The LAN version type of the STAR TSP100 is connected to the local network and the printer is communicated by multiple devices over the network. Offering high reliability, superior speeds, as well as a truly simple installation process.
Factors to Determine the Host IP Address
Role of the IP address in Network Printers.
Now you know that every printer connected to a network is put on an IP address. As mentioned before, this IP address is similar to the printer’s home address on the network. Any other device can send print jobs directly to it.
Why It Is Necessary to Set up Your Printer on Your Network
If it’s input incorrectly, the computer or POS system you’re using will not be able to find printer on network. This can lead to instances of either printing mistakes or otherwise complete failure of printing.
What is a Host IP Address?
Definition of an IP Address
An IP (Internet Protocol) address is a number that is assigned to every device on a network. And it is like a phone number through which devices can ‘dial’ one another and pass on information.
How a Host IP Address Works in a Local Network
In a local network, the IP address means your computer or any other devices will be able to find the printer and signify how they will exchanged information. The host IP address is the actual channel name for your printer in this network connection.
Tools You Will Need to Identify the Host IP
- Any computer connected to the same network as the STAR TSP100
- Entry into the router’s configuration page
- An IP scanning software if in anyway required
Methods to Identify the Host IP Address of STAR TSP100
This section provides you with various possibilities to learn the host IP address of the STAR TSP100 printer. Down to the best practices.
Method 1: Employment of the Printer’s Self-Print Function
The easiest way is to use the self-print for that printer and look at the IP address, the default gateway, subnet mask, DNS1, and DNS2.
- Tracing Bad Connections – The first step to try is to shut down the STAR TSP100 printer.
- Press the Feed button – Keep it pressed – With the Feed button – Navigation arrow right
- Turn the Printer Back On – With the feed button pressed, switch on the printer back on.
- Press and hold the Feed Button – Wait until the printer starts to print data then the Feed Button shall be released.
- A configuration page will be printed and it will contain the IP address.
Method 2: Where and how to see connected devices on the Router
The other method is to log into the router’s web interface to look up the routines of the devices.
- Access Router Interface – Use a web browser and in the address field, enter the IP address. Some of this information can be found in the users manual of the routers when you purchase them.
- Check the said Device List – It’s possible there is a part of the device’s list that can be viewed. The STAR TSP100 should pop up connected with its IP address.
Method 3: Using IP Scanning Software
If above methods cannot work, then one should use the IP scanning to look for its position in the network.
- Download an IP Scanner – Advanced IP Scanner or Angry IP Scanner is examples of tools that will scan your whole network to identify all connected devices.
- For some of the printer models, the STAR TSP100 can be simply scanned across the Network and it will appear in the list of discovered devices.
How to go to setup page of STAR TSP100
Wondering how to access the router’s settings? A router has an IP address; type this address in your browser tab. This will open up the printers web page enabling one to change such aspects as network settings or even update the firmware.
Troubleshooting Tips
- Printer is not displayed on the network – Disconnect both printer and router power and reconnect and make sure they are on the same work network.
- Another problem is IP Address Keeps Changing – The best solution to this problem is to set the IP address to static.
- Web Interface – Cannot be accessed – Either check out the IP address assigned to the printer or reboot the device.
Conclusion
One of the first priorities How to Identify Startsp Host Ip Star Tsp100.Just as I showed you various ways to find the IP address of your brother’s chosen device using the self-print function, checking your router or using scanning software, it turns out that it is much easier than you might think.
FAQs
How do I return the IP address back to default on Star Micronics’ TSP100?
The IP address of the printer can be reset through the printer’s web page or by pressing reset button sited at the rear end of the printer.
If my printer’s IP address continually changes, what do I have to do?
To avoid this from happening set the IP address through the router or by accessing the setting page of the printer.
Is there a way that I can fix the IP address for my, my STAR TSP100?
Indeed, it is possible to do this through the web interface of the printer.
